« Back
EAT E-Glo S Hybrid Tube Phonostage

This beautiful hybrid tube phonostage from EAT is a great match for your high-end analogue system! One of the perks of this particular unit are easy to use impedance toggle switches, so finding that perfect match for any moving-coil or moving-magnet cartridge is a breeze (and borderline fun if you're weird like us)!

$2995.00

Elegant high-end tube phono pre-amplifier with ultra slim design!

E-glo S – is a hybrid phono preamplifier that utIlizes ECC83 tubes (twin triode) in the first and second gain stages In order to get higher gain and lower noise we use in the first stage a cascode connection of tube with with two paralelly connected low-noise J-FET transistors.

RIAA curve is equalised fully passive and splitted in two steps which allows to achieve perfect impedance matching between the gain stage and equalization block. Phono preamplifier doesn't have any global feedback. It has a massive aluminium chassis, large possibility of adjusting the impedance, capacity and gain. It has subsonic filter with mild effect which doesn't affect audible frequencies in unpleasant way.

A very important part is the advanced power supply that uses anode voltage regulation and a well filtrated voltage. Filtration is in three steps, this result is a perfect S/N ratio and undisturbed musical experience.

E.A.T. E-Glo S Tube phono preamplifier technical information
Input impedance MC 10,25,50,75,100,1000 Ohm
Load capacity 50,100,150,200,270,320,420 pF
Output impedance 100 ohms
Load capacity 50,100,150,200,270,320,420 pF
Gain MM 45 dB
Gain MC 45,50,55,65,70 dB
RIAA accuracy within 0,5dB/20Hz – 20kHz
Subsonic 18 dB / Octave
Input RCA
Output RCA
Power supply DC18V/1
Dimensions W × H × D 435 × 90 × 270 mm