HIGH Mk2
The High Mk2 replaces our original High, which has been sold to more than 2,000 happy customers since 2016.
The High Mk2 is essentially a Low Mk2 with two magnetically attached extender bases, giving an adjustable height range of 32–94mm. This makes it a great fit for turntables with thicker platters — VPI, Clearaudio, Dr. Feickert, Kuzma, McIntosh, and many more.
Designed, hand-assembled, and individually tuned by Lasse & Jeremy in our workshop in Oslo, Norway. Machined in Switzerland for even higher mechanical precision. Solid stainless steel with a superior glass-blasted finish.
Available worldwide from April 2026.
Will it fit my turntable?
You’ll need a flat, unobstructed mounting surface between the edge of the platter and the base of the tonearm to adhere the magnetic mounting disc. Point the stylus towards the middle of the run-out groove of a 12” record — you’ll need approximately 28mm of free space under the tonearm.
The High Mk2 is designed for turntables with 32–94mm from the mounting surface up to the underside of the tonearm, measured while the stylus is in the groove.
LOW Mk2
The Low Mk2 replaces our original Low, which has been sold to more than 3,500 happy customers since 2016. It fits most turntables with regular thickness platters — Thorens, Linn, Pro-Ject, Rega, MoFi, and many more.
Designed, hand-assembled, and individually tuned by Lasse & Jeremy in our workshop in Oslo, Norway. Machined in Switzerland for even higher mechanical precision. Solid stainless steel with a superior glass-blasted finish.
Available worldwide from late 2025.
Will it fit my turntable?
You'll need a flat, unobstructed mounting surface between the edge of the platter and the base of the tonearm to adhere the magnetic mounting disc. Point the stylus towards the middle of the run-out groove of a 12" record — you'll need approximately 28mm of free space under the tonearm.
The Low Mk2 is designed for turntables with 32–49mm from the mounting surface up to the underside of the tonearm, measured while the stylus is in the groove.
Low Mk2 + Rega P8/P10/Naia Mount
Limited edition mounting platform for the Low model. Custom machined to fit the skeletal plinth Rega P8/P10/Naia.
I got countless emails from customers asking how they can get our Low model to work when there is a circular hole just where it needs to be mounted.
The P8/P10-Mount is designed to be very intuitive and easy to install. The mounting platform is friction-fit and when the recessed arc is aligned along the curvature of the platter, the mount will be oriented correctly.
If you´re a new customer, you need the Low P8/P10-bundle. If you already have a Low model, you can just get the P8/P10Mount and you´re back in business in no time.
The P8/P10Mount will also fit the other Rega models from the P3 and up as the 44mm diameter opening in the arm brace is the same for all of them.
This is a highly unofficial product and has nothing to do with Rega.
Disco Mk3 - For Technics
Custom designed to fit every variation of the Technics SL-1200/1300-series — from the legendary 1979 Mk2 DJ workhorse up to the 2026 high-end models G/GR/GR2/GAE/GME. Yes, it fits absolutely all of these models as they have an identical armboard geometry.
Designed, hand-assembled, and individually tuned by Lasse & Jeremy in our workshop in Oslo, Norway. Machined in Switzerland for even higher mechanical precision. Solid stainless steel with a superior glass-blasted finish.
Available worldwide from late 2025.